English

News & Case

Home

Case

Company News

Industry Information

Oct 21,2022

How to connect the microphone to the stereo?

Insert the receiver cable into the output hole on the receiver, just as the microphone is plugged into the air.
Connect the other end to the audio port of the amplifier microphone. The audio port usually has notes. You need to check them here.
Plug the power cord into the wireless receiver. Plug in the other end.
Install the battery of the microphone, paying attention to the positive and negative poles, the small end to the large end.
Finally, turn on the receiver, and then turn on the wireless canister. The signal light will show green.
Finally, turn on the switch to check the connection status. If you want to adjust the frequency of the microphone, you can set the corresponding frequency.
Introduction to microphone:
Microphone, scientific name is microphone, also known as microphone, microphone. A microphone is an energy converter that converts sound signals into electrical signals. It can be classified into moving coil type, capacitive type, electret and recently emerging silicon micromanipulator.
In addition, there are liquid microphones and laser microphones. Most microphones are electret condenser microphones, which work by using a polymer vibrating membrane with permanent charge isolation.

Next —

Do you know how to use a microphone?

Back